Free Shipping on orders over $200* Conditions Apply

TRU DESIGN POSITION MONITORED VALVE DISPLAY PANEL MOUNT CLEARANCE

$215.00 $309.90
Tax included

Description

Position Monitoring allows remote monitoring of the Ball Valve position. The Position Monitoring circuit can also be used as part of an engine or generator start interlock to ensure these don’t start without cooling water available.

TRUDESIGN™ Certified Ball Valves are specifically designed for use in marine applications above and below the water
line.
Features:
▪ Allows remote monitoring of up to four Ball Valves (per seacock display panel) in the open or closed position.
▪ Can be wired into or part of an engine or generator start “interlock” to ensure they don’t start without cooling
water available.
▪ Manufactured from a glass-reinforced Nylon composite – High strength, tough and light weight.
▪ Immune to corrosion & electrolysis – No corrosion breakages, increased safety.
▪ Electrically non-conductive. No electrical bonding.
▪ Suitable for use on all hull types - aluminium, steel, wood or FRP.
▪ The ball and sealing rings utilise a PTFE polymer to ensure a smooth action and minimal fouling of the internal
ball.
▪ Can be “locked” in the closed position to comply with toilet waste outlet regulations. US Coast Guard
Regulation 33 CFR 159.7 and ISO Standard 8099 for locking of toilet waste outlets
▪ Large operating temperature range – From -40°C to +110°C ( for Ball Valve only)
▪ Available in both BSP and NPS thread forms
▪ U.V resistant – Will not degrade or discolour from the sun’s ultraviolet rays.
▪ 100% leak tested before leaving factory.

Delivery and Shipping

Most orders will be shipped same day if placed prior to 11am our time.

We offer a flat rate standard shipping of $15 on smaller items this covers the labor charge to pack and send your item along with consumables such as packaging, tape etc.

for orders under $200 express post will be $18.50

For orders over $200 we offer Free standard shipping This Excludes Paints, heavy items and bulky items

For express post on order over $200 will be an additional $4

Please note we do not ship some items such as paints, flares, heavy items like chain and anchors.

Some bulky and heavy items will have a freight surcharge added in you cart prior to check out.

If we don't have enough stock please contact us as we have deliveries and stock updates daily

★★★★★
★★★★★
★★★★★
★★★★★

The Leading Online and Retail Store

Owner Will Baum has been involved in sailing for over 18 years with a history of marine retail, along with some boat building and repairs. Because we sail we know its important for top quality customer service with quick shipping to get you back on the water quickly. See our reviews below.

BLA

TRU DESIGN POSITION MONITORED VALVE DISPLAY PANEL MOUNT CLEARANCE

$215.00 $309.90

Position Monitoring allows remote monitoring of the Ball Valve position. The Position Monitoring circuit can also be used as part of an engine or generator start interlock to ensure these don’t start without cooling water available.

TRUDESIGN™ Certified Ball Valves are specifically designed for use in marine applications above and below the water
line.
Features:
▪ Allows remote monitoring of up to four Ball Valves (per seacock display panel) in the open or closed position.
▪ Can be wired into or part of an engine or generator start “interlock” to ensure they don’t start without cooling
water available.
▪ Manufactured from a glass-reinforced Nylon composite – High strength, tough and light weight.
▪ Immune to corrosion & electrolysis – No corrosion breakages, increased safety.
▪ Electrically non-conductive. No electrical bonding.
▪ Suitable for use on all hull types - aluminium, steel, wood or FRP.
▪ The ball and sealing rings utilise a PTFE polymer to ensure a smooth action and minimal fouling of the internal
ball.
▪ Can be “locked” in the closed position to comply with toilet waste outlet regulations. US Coast Guard
Regulation 33 CFR 159.7 and ISO Standard 8099 for locking of toilet waste outlets
▪ Large operating temperature range – From -40°C to +110°C ( for Ball Valve only)
▪ Available in both BSP and NPS thread forms
▪ U.V resistant – Will not degrade or discolour from the sun’s ultraviolet rays.
▪ 100% leak tested before leaving factory.

View product