Rule Bilge Pump Lo-Pro 900 Auto RWB5159

Automatic RULE LP900S LoPro bilge pump 12volt

The automatic LoPro includes all features as detailed further above with the additional benefit of automatic operation in multiple modes - NO float switch is required.

• High or low water sensing mode - the pump can be set to start operation at either 33mm or 50mm bilge water height
• Electronic automatic timer mode - The pump can be set to automatically check for water every 2 1/2 minutes - if water is present it will continue to run and pump bilge water. This feature is very handy - however if you leave the boat unattended on a mooring it may run down the battery over time, if you dont have solar panels or a wind generator Etc to constantly charge the battery - in this case set the pump only to high or low mode
• Includes pump test mode
• Includes manual over-ride 3rd wire - requires a Rule 3 way
• panel switch RWB23 or 107 to operate this feature - see page 282
• 12 volt 4 amp use a 7.5 amp fuse
• 12 volt DC only - DO NOT run direct off a 240v-12v transformer

Most orders will be shipped same day if placed prior to 11am our time.

We offer a flat rate standard shipping of $15 on smaller items this covers the labor charge to pack and send your item along with consumables such as packaging, tape etc.

for orders under $200 express post will be $18.50

For orders over $200 we offer Free standard shipping This Excludes Paints, heavy items and bulky items

For express post on order over $200 will be an additional $4

Please note we do not ship some items such as paints, flares, heavy items like chain and anchors.

Some bulky and heavy items will have a freight surcharge added in you cart prior to check out.