Free Shipping on orders over $200* Conditions Apply

SPINLOCK DECKVEST VITO WITH HRS 170N PFD

★★★★★ (6)
$490.00
Tax included

Description

• Striking design finish in durable rip stop fabric
• 170N buoyancy with Hammar® hydrostatic automatic inflator
• Structured fit allows easy donning with simple to adjust buckles
• Course and fine tune adjustment. Fit lifejacket to body size.
• Fine tune adjust each time for layers

• Added protection in high impact areas
• New style structured sprayhood to reduce the risk of secondary drowning
 Pylon Lifejacket Light™ – high intensity, water activated flashing LED Light. 23cm flexible antenna wand gives improved visibility above head & water
 Lume-On™ - Lifejacket bladder illumination lights included
• Wider 40mm leg strap with stowage

What is HRS?

Spinlock still considers a knife to be an essential piece of carried equipment. However, we have yet to develop a reliable consistent safety line clip release system. Instead, we are focused on developing a release system of the actual lifejacket harness. Testing showed that the harness release system needed to be simple to understand, simple to use and simple to maintain as well as reliable over the lifetime of the lifejacket. At the same time, the harness release system must meet the requirements of the ISO12402 approval.

Staying connected to the boat is undoubtedly safer than being in the water and use of a safety line is actively encouraged. However, in the event of a fall overboard, a casualty can find themselves being dragged/trapped alongside or behind the vessel. A situation which can be hard to be released from.

Hammar® Hydrostatic Automatic Inflator
The Hammar® inflation system is activated by water pressure and will not inflate until the cap is approximately 10cm underwater.

This system is designed for use in more extreme conditions and extended offshore sailing. The benefit of the Hammar® system is that the jacket cannot accidentally inflate from being wet with rain and sea spray.

The unit has a single indicator to show if armed. Delayed inflation can be caused if full immersion of the firing head is delayed by buoyant foul weather clothing.

Delivery and Shipping

Most orders will be shipped same day if placed prior to 11am our time.

We offer a flat rate standard shipping of $15 on smaller items this covers the labor charge to pack and send your item along with consumables such as packaging, tape etc.

for orders under $200 express post will be $18.50

For orders over $200 we offer Free standard shipping

For express post on order over $200 will be an additional $4

Please note we do not ship some items such as paints, flares, heavy items like chain and anchors.

Some bulky and heavy items will have a freight surcharge added in you cart prior to check out.

If we don't have enough stock please contact us as we have deliveries and stock updates daily

★★★★★
★★★★★
★★★★★
★★★★★

The Leading Online and Retail Store

Owner Will Baum has been involved in sailing for over 18 years with a history of marine retail, along with some boat building and repairs. Because we sail we know its important for top quality customer service with quick shipping to get you back on the water quickly. See our reviews below.

Harken

SPINLOCK DECKVEST VITO WITH HRS 170N PFD

$490.00

• Striking design finish in durable rip stop fabric
• 170N buoyancy with Hammar® hydrostatic automatic inflator
• Structured fit allows easy donning with simple to adjust buckles
• Course and fine tune adjustment. Fit lifejacket to body size.
• Fine tune adjust each time for layers

• Added protection in high impact areas
• New style structured sprayhood to reduce the risk of secondary drowning
 Pylon Lifejacket Light™ – high intensity, water activated flashing LED Light. 23cm flexible antenna wand gives improved visibility above head & water
 Lume-On™ - Lifejacket bladder illumination lights included
• Wider 40mm leg strap with stowage

What is HRS?

Spinlock still considers a knife to be an essential piece of carried equipment. However, we have yet to develop a reliable consistent safety line clip release system. Instead, we are focused on developing a release system of the actual lifejacket harness. Testing showed that the harness release system needed to be simple to understand, simple to use and simple to maintain as well as reliable over the lifetime of the lifejacket. At the same time, the harness release system must meet the requirements of the ISO12402 approval.

Staying connected to the boat is undoubtedly safer than being in the water and use of a safety line is actively encouraged. However, in the event of a fall overboard, a casualty can find themselves being dragged/trapped alongside or behind the vessel. A situation which can be hard to be released from.

Hammar® Hydrostatic Automatic Inflator
The Hammar® inflation system is activated by water pressure and will not inflate until the cap is approximately 10cm underwater.

This system is designed for use in more extreme conditions and extended offshore sailing. The benefit of the Hammar® system is that the jacket cannot accidentally inflate from being wet with rain and sea spray.

The unit has a single indicator to show if armed. Delayed inflation can be caused if full immersion of the firing head is delayed by buoyant foul weather clothing.
View product