TECHNIGLUE R60 is a solvent free, epoxy resin, specifically formulated for use with TECHNIGLUE hardeners to cure at room temperature, and produce high-strength, waterproof bonds. The thixotropic nature of the adhesive provides good gap filling and hold-up, on vertical surfaces. TECHNIGLUE H60 hardeners are available with two different curing rates - Fast and Slow - allowing working times to be adjusted according to the job size and working temperature. TECHNIGLUE R60 is suitable for bonding structural elements fabricated from wood, concrete, fibreglass, stone & marble, pottery, metal (ferrous and nonferrous) and some plastics.
MIX RATIO 1 part hardener to 2 parts resin by volume Take care to assure that the components are thoroughly mixed to a uniform colour before applying.
APPLICATION The surfaces to be bonded should be dry and free from any contaminants such as oil or dust. Fibreglass, timber, painted, or metal surfaces should be thoroughly sanded to provide a good key. Concrete surfaces should be wire brushed to remove laitance. Apply sufficient mixed epoxy to one or both of the surfaces to assure intimate contact between the bonding surfaces. Excessive clamping pressures should be avoided. Components need only be held firmly to avoid movement during the curing process. COVERAGE Depending on porosity and surface roughness, one litre of mixed TECHNIGLUE R60/H60 will cover approximately three square metres. CLEAN UP Uncured TECHNIGLUE R60 resin and H60 hardener mixture can be cleaned up with warm water.